Siemens LC91KLT60 - Appliance Mounting Procedures; Installing the Appliance Bracket; Securing the Appliance

en Installation instructions
20
8.
Place the detached part at the required position.
Observe the entire length of the flue duct.
9.
Drill the 8mmdiameter holes to a depth of 80mm
for the fastenings.
10.
Remove the template.
Installing the appliance bracket
1.
Screw on the appliance bracket for the extractor
hood hand-tight.
2.
Use a spirit level to align the appliance bracket hori-
zontally and screw it firmly in place.
3.
Screw the enclosed sleeves fully into the upper ap-
pliance bracket.
Installing the appliance
1.
Place the mains plug on top of the appliance.
2.
Remove the grease filters.
3.
Hook the appliance into the appliance bracket from
above so that it clicks firmly into place.
4.
To align the appliance, if necessary, adjust the
height of the appliance from above using a screw-
driver.
5.
Secure the appliance from above using 2 nuts.