Installation instructions en
21
6.
Note:Do not knock the gas pressure dampers
against the painted inner frame.
Clip the gas pressure dampers in on the left- and
right-hand side of the appliance.
7.
Fit the glass panel.
‒ Hold the glass pane firmly with both hands.
‒ Hook the hinge plate from right to left into the
counterpart on the appliance and engage it.
Hold the glass panel firmly until the two hinges are
engaged.
8.
Clip the gas pressure dampers onto the left- and
right-hand side of the glass panel.
9.
Insert the plug.
‒ Ensure that the plug engages with a click.
Plug connection to the glass plate
10.
Insert the protective hose into the opening provided
for it.
To Next Page
Loading...
