Siemens LOGO! Basic - Explanation of Substances and Components

Recycler Guide for LOGO!
Product Information, 09/2024, A5E54068028-AA
15
Explanation of substances and components
5
Components according to Directive 2012/19/EU Annex VII
You must remove at least the following substances, mixtures and components from the
product:
Substance/mixture/component
Position
Disassembly step
PCBs with a surface area greater than 10 cm
2
3, 4, 5
Step 8
Plastic with brominated flame-retardants
3, 4, 5, 10
Steps 2 and 8
Additional information
In order to support the recycling economy, SIEMENS creates transparency that goes beyond
the regulatory requirements. See the table for additional information on smaller PCBs or
displays, as well as metal alloys containing elements that may be critical at the end of the
service life, such as beryllium or lead.
This information does not fall within the scope of Annex VII of Directive 2012/19/EU.
Substance/mixture/component
Position
Disassembly step
Liquid crystal displays (possibly with enclosure) with a
surface area of less than 100 cm
2
6
Step 9
PCBs with a surface area less than 10 cm
2
10
Step 2