To Next PageTo Next Page
Need help?Do you have a question about the Siemens LOGO! 12/24RC and is the answer not in the manual?
General| Power Supply | 12/24 V DC |
|---|---|
| Outputs | 4 Relay Outputs |
| Relay Output Current | 10 A |
| Real-time Clock | Yes |
| Clock | Yes |
| Protection Class | IP20 |
| Mounting Type | DIN rail |
| Inputs | 8 digital |
| Display | Yes |
| Weight | 210 g |
| Program Memory | 400 blocks |
| Dimensions | 72 mm x 90 mm x 55 mm |
Instructions for mounting and removing the LOGO! module on a DIN rail.
Guidelines for connecting power, inputs, and outputs to LOGO! devices.
Details LOGO!'s operational behavior and startup states after power is applied.
Explains LOGO! blocks and the system for assigning block numbers for program structure.
Explains how to translate a traditional circuit diagram into a LOGO! program.
Guides users through switching to programming mode and entering their first program.
Lists and describes the fundamental logic operations available as blocks in LOGO!.
Details various special functions available in LOGO!, with circuit diagram representations and descriptions.
Explains how to access and navigate the parameterization menu for adjusting settings.
Detailed steps for transferring a program from the LOGO! device to a memory module or card.
Instructions for establishing a connection between a LOGO! device and a PC using the LOGO! PC cable.
