Need help?Do you have a question about the Siemens LOGO! 12/24RCE and is the answer not in the manual?
General| Power Supply | 12/24 V DC |
|---|---|
| Communication | Ethernet |
| Dimensions | 90 x 72 x 55 mm |
| Protection Class | IP20 |
| Digital Inputs | 8 |
| Digital Outputs | 4 (Relay) |
| Display | Yes |
| Operating Temperature | 0 to 55 °C |
| Storage Temperature | -40 to 70 °C |
| Program Memory | 400 function blocks |
| Relative Humidity | 5% to 95% (non-condensing) |
States Siemens' non-liability for defects, errors, or damages from application examples, except for mandatory liability cases.
Highlights the need for industrial security concepts and Siemens' role in providing secure products.
Lists and describes the specific Siemens hardware and software modules used in the application.
Details the exact hardware and software components required for the application example.
Explains how to interconnect LOGO! modules and other devices in a network view using LOGO! Soft Comfort V8.
Guides on adding devices to the network view and establishing data exchange between LOGO! devices.
Provides instructions for setting up the hardware components, including connecting sets with LAN cables.
Details the steps to configure IP addresses and set the LOGO! controller's master/slave mode via the LOGO! display.
Covers the final steps to get the system running, including program loading and panel settings.
Outlines initial settings for the KTP400, noting IP address changes require stopped runtime.
Guides on configuring the PC's network interface settings for communication with LOGO! devices.
Explains how to set up and customize dynamic warning messages in WinCC based on wind speed.
To Next Page