Siemens LOGO! 12/24RCE - 5.2 Operator Control and Monitoring with KTP700 and KTP400

5 Operation
House Control and Weather Sensors - LOGO! Set 11
Entry ID: 68585346, V2.1, 09/2018
31
 Siemens AG 2018 All rights reserved
5.2 Operator Control and Monitoring with KTP700 and
KTP400
Table 5-1
No.
Action/response
KTP700 and KTP400
1.
Verify on the KTP700
(LOGO! Set 10) that
"Automatic mode” for
the blinds is activated.
KTP700
2.
The wind speed
exceeds 20 km/h.
KTP400
3.
All blinds move up and
stay in this final position
for as long as the wind
is strong (>20 km/h).
KTP700
4.
The KTP700 displays a
warning message that
the wind speed has
increased.