Siemens M65 - Clear Sim Card Barring

right page (15) of M65 SUG X-Cite en, A31008-H7150-A1-4-7619 (09.08.2005, 15:31)
©
Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SAR_Update_050805\m65_retail\en\M65K_Startup.fm
15Security
VAR Language: en; VAR issue date: 041104
C¢T¢Security
¢Codes
¢Select function.
Change PIN2
(Display only if PIN2 is available).
Proceed as for Change PIN.
Chg.phonecode
(Change phonecode)
You define the phone code (4 to
8 digits) when you call up a phone-
code protected function for the first
time (e.g. Direct call, p. 47). It is then
valid for all phone-code protected
functions.
Following the third unsuccessful
attempt, access to the phone code
and the functions that use it is
denied. If this occurs, contact the
Siemens Service (p. 56).
Clear SIM card barring
If the PIN is entered incorrectly three
times, the SIM card is barred. Enter
the PUK (MASTER PIN) provided by
your service provider with the SIM
card in accordance with the instruc-
tions. If the PUK (MASTER PIN) has
been lost, please contact your serv-
ice provider.
Preventing accidental
activation
Even if PIN control is deactivated
(p. 14) confirmation is required to
switch on the phone.
This prevents accidental activation
of the phone, e.g. when you are car-
rying it in a bag or when you are trav-
elling in an aircraft.
B
Hold down.
C
Press. The phone switches
on.
§Cancel§ Press this key or take no
action. The phone does
not switch on.