right page (43) of M65 SUG X-Cite en, A31008-H7150-A1-4-7619 (09.08.2005, 15:31)
Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SAR_Update_050805\m65_retail\en\M65K_Setup.fm
43Setup
VAR Language: en; VAR issue date: 041104
Ringer setting
Activate/deactivate the ringer or
reduce it to a short beep.
Silent alert
To avoid the disturbance caused by a
ringing phone, you can activate the
silent alert function as an alterna-
tive. The vibration alarm can be
switched on in addition to the ring-
tone. This function is deactivated
when the battery is being loaded
and accessories are connected
(except the headset).
Volume
Set different volumes for types of
call/functions.
Assign ringtone
A ringtone which has already been
selected will be played or the list of
possible ringtones will be displayed
for selection.
Call setup
C¢T¢Call setup
¢Select function.
Hide ID b
If activated, your phone number will
not appear on the other party’s dis-
play (depending on the service pro-
viders).
Call waiting b
If you are registered for this service,
you can check whether it is set and
you can activate/deactivate it.
Divert
You can specify when calls should be
diverted to your mailbox or other
phone numbers.
Set up call divert (example):
Unanswered
b
I
Select Unanswered.
(Includes the conditions
Not reachable, No reply,
Busy, see below).
C
Confirm and select Set,
then enter the phone
number to which the call
will be diverted.
C
Confirm. The setting is
confirmed by the
network.
Additional information
Please make sure you have accepted the
call before holding the phone to your ear.
This will avoid damage to your hearing from
loud ringtones.
To Next Page
Loading...
