Siemens M65 - Page 47

©
Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SAR_Update_050805\m65_retail\en\M65K_Setup.fm
left page (46) of M65 SUG X-Cite en, A31008-H7150-A1-4-7619 (09.08.2005, 15:31)
Setup46
VAR Language: en; VAR issue date: 041104
Connectivity
C¢T¢Connectivity
¢Select function.
GPRS b
(General Packet Radio Service)
GPRS is a method for transmitting
data faster in the mobile network.
For symbols in the display see p. 6.
GPRS info
Display connection information.
IrDA
Your phone has an infrared inter-
face. The distance between the two
devices must not exceed 30 cm. The
infrared windows in both appliances
must be aligned as accurately as pos-
sible with each other. For symbols in
the display see p. 6.
Data services
Default setting and activation of the
connection profiles for MMS, WAP
applications. The phone default set-
ting varies from service provider to
service provider. Consult your serv-
ice provider or go to this address in
the Internet for more information
www.siemens.com/
mobilephonescustomercare
in the "FAQ" section.
HTTP profile
The phone default setting varies
from service provider to service pro-
vider. Consult your service provider
or go to this address in the Internet
for more information
www.siemens.com/
mobilephonescustomercare
in the "FAQ" section.
Authentication
Activate or deactivate encrypted
Internet dial-up (CSD connections
only).
Fax/data
Send voice/fax b
Set this function on the phone before
transmission so that you can switch
from voice mode to fax mode.
Rec. voice/fax
Start the required communication
program on your PC and activate the
function on the phone during the call
(the PC will take over the connec-
tion).
Rec. fax/data
b
The call is signalled by a special ring-
tone and the type of call (fax or data)
is displayed. Now start the commu-
nication program on your PC to
receive the fax/data.