1FK7 Synchronous Motors
Configuration Manual (PFK7), 10/2005 Edition, 6SN1197-0AD06-0BP1 3-1
Technical Data and Characteristics 3
3.1 Introduction
Note
For converter operation on 480 V line supplies, DC link voltages greater than 600 V occur.
The motors are suitable for DC link voltages up to 740 V.
For a description of the shift of the voltage limiting characteristics, refer to the documentation
"General Section for synchronous motors".
The specified thermal S3 limiting characteristics are referred to ∆T = 100 K for
- 1 min cycle duration for SH 28 and 36
- 10 min cycle duration for SH 48, 63, 80, 100
To Next Page
Loading...
