Siemens MICROMASTER Vector

© Siemens plc 1999 G85139-H1751-U529-D1
4/8/9
9
Contents
SAFETY INSTRUCTIONS ............................................................... 4
1. OVERVIEW .............................................................................. 6
2. INSTALLATION - MICROMASTER Vector........................... 12
3. INSTALLATION - MIDIMASTER Vector ............................... 25
4. CONTROLS AND BASIC OPERATION ................................ 32
5. OPERATING MODES ............................................................ 36
6. SYSTEM PARAMETERS....................................................... 41
7. FAULT AND WARNING CODES........................................... 65
8. SPECIFICATIONS.................................................................. 67
9. SUPPLEMENTARY INFORMATION ..................................... 73
MICROMASTER Vector
MIDIMASTER
Vector
Operating Instructions

Siemens MICROMASTER Vector Specifications

General

Brand	Siemens
Model	MICROMASTER Vector
Category	Media Converter
Language	English

Summary

Safety Instructions

General Safety Warnings

Important warnings and precautions for safe operation and installation.

1. OVERVIEW

1.1 Installation - General Notes

1.2 Wiring Guidelines to Minimize EMI

Recommendations for wiring to reduce electromagnetic interference (EMI).

1.3 Electrical Installation - General Notes

General notes regarding electrical installation and power supply.

2. INSTALLATION - MICROMASTER Vector

2.1 Mechanical Installation

Procedures and considerations for physically mounting the MICROMASTER Vector unit.

2.2 Electrical Installation

Details on connecting power and control cables for the inverter.

2.2.1 Power and Motor Connections - Frame Size A

Connecting power and motor cables for Frame Size A MICROMASTER Vector units.

2.2.2 Power and Motor Connections - Frame Size B

Connecting power and motor cables for Frame Size B MICROMASTER Vector units.

2.2.3 Power and Motor Connections - Frame Size C

Connecting power and motor cables for Frame Size C MICROMASTER Vector units.

2.2.4 Control Connections

Instructions for making control connections to the MICROMASTER Vector.

2.2.5 External Motor Thermal Overload Protection

How to connect a PTC temperature sensor for motor overload protection.

3. INSTALLATION - MIDIMASTER Vector

3.1 Mechanical Installation

Procedures for physically mounting the MIDIMASTER Vector units.

3.2 Electrical Installation

Details for electrical installation and wiring of the MIDIMASTER Vector.

3.2.1 Power and Motor Connections

Connecting power and motor cables for MIDIMASTER Vector units.

3.2.2 Control Connections

Instructions for making control connections to the MIDIMASTER Vector.

3.2.3 Motor Overload Protection

Measures for protecting the motor against overheating.

4. CONTROLS & BASIC OPERATION

4.1 Controls

Description of the front panel controls and their functions.

4.2 Basic Operation

General guidance on operating the inverter and performing initial tests.

4.2.3 Basic Operation - 10 Step Guide

A step-by-step guide for basic setup and operation of the inverter.

5. OPERATING MODES

5.1 Digital Control

5.3 Motor Control Modes

Explanation of different motor control modes available in the inverters.

5.4 Stopping the Motor

5.5 If the Motor Does Not Start Up

5.6 Local and Remote Control

5.7 Closed Loop Control

Description of the PID control function for closed-loop applications.

6. SYSTEM PARAMETERS

Resetting to Factory Defaults

Procedure for resetting all parameters to factory default settings.

P005 Digital frequency setpoint (Hz)

P012 Minimum motor frequency (Hz)

P021 Minimum analogue frequency (Hz)

P025 Analogue output 1

P031 Jog frequency right (Hz)

P051 Selection control function, DIN1

Configures DIN1 for selection control or fixed frequency.

P055 Selection control function, DIN5

P063 External brake release delay

P073 DC injection braking (%)

P074 12 t motor protection

P076 Pulse frequency

P077 Control mode

Selects the motor control mode (V/f, FCC, Vector).

P088 Automatic calibration

Performs automatic measurement of motor stator resistance.

P140 Most recent fault code

P321 Minimum analogue frequency for analogue setpoint 2 (Hz)

P006 Frequency setpoint source selection

Selects the source for the frequency setpoint (digital, analogue, etc.).

P013 Maximum motor frequency (Hz)

P022 Maximum analogue frequency (Hz)

P032 Jog frequency left (Hz)

P052 Selection control function, DIN2

Configures DIN2 for selection control or fixed frequency.

P356 Selection control function, DIN6

P064 External brake stopping time

P080 Nominal rating plate motor power factor (cos)

P186 Motor instantaneous current limit (%)

P322 Maximum analogue frequency for analogue setpoint 2 (Hz)

P002 Ramp-up time (seconds)

P007 Keypad control

P023 Analogue input 1 type

Configures the type of signal for analogue input 1.

P053 Selection control function, DIN3

Configures DIN3 for selection control or fixed frequency.

P061 Selection relay output RL1

P066 Compound braking

P081 Nominal rating plate frequency for motor (Hz)

P201 PID closed loop mode

P323 Analogue input 2 type

P910 Local USS mode

P003 Ramp-down time (seconds)

P054 Selection control function, DIN4

P062 Selection relay output RL2.

P083 Nominal rating plate current for motor (A)

P202 P gain

P386 Sensorless vector speed control loop gain - proportional term

Sets the proportional gain for sensorless vector control.

7. FAULT AND WARNING CODES

7.1 Fault Codes

Lists fault codes, their causes, and corrective actions for the inverter.

7.2 Warning Codes

Lists warning codes, their causes, and corrective actions.

9. SUPPLEMENTARY INFORMATION

9.3 Electro-Magnetic Compatibility (EMC)

Information on EMC compliance and performance characteristics.

9.5 Users Parameter Settings