Error correction:
Check and correct the following network configuration:
Instead of the machine name (machine name\instance), enter the IP address (ip
address\instance) of the SINUMERIK controller (machine).
- OR -
Check under "Advanced sharing settings" whether the "Network discovery" function is set to
"ON".
Message for the SINUMERIK Integrate installation
On Windows Server 2016 machines an additional security setting is required to be able to
communicate with the SQL database selected before installation.
With TLS 1.0 protocol disabled an error message might come up during installation:
Troubleshooting
Manage MyResources, Optimize MyProgramming /NX-Cam Editor
Installation Manual, 12/2019, A5E44672080B AE 191
To Next Page
Loading...
Need help?
General
