Connecting MindConnect Elements
Getting Connected to MindSphere
38 Getting Started, 05/2018
Procedure
Before you start onboarding, connect MindConnect IoT2040 to MindSphere, as follows:
Insert Ethernet cable for Internet into the port labeled with X1 P1.
Figure 5-7 Connecting the port X1P1 for internet (MindSphere)
Note
During the onboarding process, only one USB stick is supported. Do not plug in more than
one USB stick. The recommended USB port is the USB port with label X60.
To Next Page
Loading...
Need help?
General