Siemens MK8000 - Page 4

4
Building Technologies 048_DMS_MK8000_ICC_MP4.10_A6V10062407_a_en.doc
Fire Safety & Security Products 06.2007
6 Testing the Configuration ....................................................................52
6.1 Checking Stations ...................................................................................52
6.2 Checking Internal Configuration..............................................................52
7 Tips for Integrating with an OPC client...............................................57
7.1 Exporting data to a 3rd party OPC Client................................................57
7.2 Using the test client.................................................................................59
7.3 Integrating into a network (Distributed configuration) .............................59
7.4 Possible difficulties in integrating an OPC client.....................................61
7.4.1 Exporting data to a 3
rd
party OPC client..................................................61
7.4.2 Integrating the OPC server into a network..............................................61
7.4.3 DCOM settings on OPC clients...............................................................71
7.5 Integrating clients that don’t support DCOM...........................................72
Appendix A. Using the System Monitor...........................................................74
Appendix B. Enabling & disabling MK8000 auto-start ...................................78