Tips for Integrating with an OPC client
73
Building Technologies 048_DMS_MK8000_ICC_MP4.10_A6V10062407_a_en.doc
Fire Safety & Security Products 06.2007
Removing OPC Transparency Support
Once installed, the OPC Transparency values should not be deleted from the reg-
istry by hand. Instead, use the utility provided to remove it.
Please note that OPC Transparency should not be deleted from the PC where the
OPC server resides.
To remove the OPC Transparency registry values, do the following:
1. Copy the ‘Delete Transparent OPC.reg’ file to the OPC client PC (MK8000 in-
stallation dir>\Utilities\OPC Transparency).
2. Double-click the file to remove the registry file.
To Next Page