Technical specifications
6.8 Technical specifications
Unified Comfort Panels Hygienic
62 Compact Operating Instructions, 04/2023, A5E52219907-AA
6.8.1 MTP700, MTP1000, MTP1200 Unified Comfort Hygienic
Weight
Unified Comfort Hygienic HMI device
Weight including gasket, clamping frame and mounting
clips, without packaging
Display
Unified Comfort Hygienic HMI device
Brightness control via Control Panel, value range
Brightness control via WinCC, value range
%, values below 5% are set to 5%
Half Brightness Life Time (MTBF
1
)
Pixel error class in accordance with ISO 9241-307
MTBF: Operating hours after which the maximum brightness is reduced by half compared to the original value. MTBF is
increased by using the integrated dimming function, for example, time-controlled via screensaver or centrally via
Power supply
Unified Comfort Hygienic HMI device
Mains and voltage buffering time
20 ms, corresponds to PS2 according to IEC 61131-2
Rated current at 24 V DC, without loads
Rated current (min. ... max.), load-dependent
Power consumption, without loads
1
2
2
Maximum permitted transient
Minimum time between two transients
The power loss generally corresponds to the specified value for power consumption.
The current and power specifications apply without a high permanent processor load by apps.