Siemens MTRPB User Manual

s
Remote Operator
Accionamiento a distancia
Commande motorisée
1 / 8
Item: MTRPB 3VL9800-3MJ01
MTRPM 3VL9800-3ML01
MTRPY 3VL9800-3MS01
MTRPN 3VL9800-3MN01
MTRPR 3VL9800-3MQ01
Use only with Siemens certified Components.
Utilizar únicamente con componentes certificados de Siemens.
A utiliser uniquement avec les composants certifiés Siemens.
Turn off and lock out all power supplying this device before
working on this device.
Replace all covers before power supplying this device is
turned on.
Couper l'alimentation de l'appareil et barrer avant de
travailler.
Remplacez touts les couverts avant que
l'approvisionnement de pouvoir soit alimenté.
Tensión peligrosa.
Puede causar la muerte o lesiones graves.
Tension dangereuse.
Danger de mort ou risque de blessures graves.
Hazardous Voltage.
Will cause death or serious injury.
Desenergice totalmente antes de instalar o darle servicio.
Reemplace todas las barreras y cubiertas antes de
energizar el interruptor.
Turn off and lock out all power supplying this device before
working on this device.
Replace all covers before power supplying this device is
turned on.
Couper l'alimentation de l'appareil et barrer avant de
travailler.
Remplacez touts les couverts avant que
l'approvisionnement de pouvoir soit alimenté.
Tensión peligrosa.
Puede causar la muerte o lesiones graves.
Tension dangereuse.
Danger de mort ou risque de blessures graves.
Hazardous Voltage.
Will cause death or serious injury.
Desenergice totalmente antes de instalar o darle servicio.
Reemplace todas las barreras y cubiertas antes de
energizar el interruptor.
Installation Instructions / Instructivo de Instalación
For Use With Frame NG, PG
Para Usar Con Caja Base NG, PG
U.S. Cat. No. Euro Order No.
I.L. No. 806842A01
MTRPB 3VL9800-3MJ01 = 24 Vdc
MTRPM 3VL9800-3ML01 = 42-48 V ac/dc
MTRPY 3VL9800-3MS01= 60 V ac/dc
MTRPN 3VL9800-3MN01 = 110-127 V ac/dc
MTRPR 3VL9800-3MQ01 = 220-250 V ac/dc
806842A01
4X M4 X 20mm
2X M4 X 10mm

Siemens MTRPB Specifications

General

Model	MTRPB
Rated voltage	230/400V AC
Trip characteristic	B, C, D
Standards	IEC 60898-1
Category	Circuit breakers
Breaking capacity	6kA
Number of poles	1P, 2P, 3P, 4P

Summary

Siemens Remote Operator Installation

Hazardous Voltage and Safety Warnings

Critical safety warnings regarding hazardous voltage and operational risks.

Product Identification and Voltage Ratings

Lists available remote operator models and their corresponding voltage ratings.

Installation Steps Overview

Steps 1-5: Initial Installation and Operation

Illustrated steps for installing and initially operating the remote operator.

Mechanical Hazard Warning

Warning about potential injury from moving internal mechanisms.

Electrical Connections and Wiring

Steps 6-8: Wiring and Diagram

Detailed guidance on wiring, torque specifications, and the wiring diagram.

Final Assembly and Options

Steps 9-10: Final Integration and Options

Instructions for final assembly, securing wiring, and integrating optional components.

Manual Override Procedures

Manual Override ON/I and OFF/O Operation

Procedures for operating the manual override in ON and OFF positions.

Manual Override Safety and Padlock Prohibition

Guidelines for manual override use and prohibition of padlocking.

Manual Override Testing

Testing Manual Override ON/I and OFF/O

Demonstrates testing the manual override function in different states.

Remote Operation and Manual Override Interface

Remote Operation Testing and Manual Override Interaction

Procedures for testing remote operation and its interaction with manual override.

Dimensional Data and Support

Device Dimensions and Specifications

Technical drawings showing the physical dimensions of the remote operator.

Technical Support and Ordering Information

Contact details for technical assistance and relevant product ordering information.