Siemens MXL User Manual

Document No. 565-957
Installation Instructions
August 12, 2005
TB3 or TB4
-
+
To FLN 1 on the Open Processo
r
120 ohms
1/4 watt
12345678910111213141516
Do NOT use
G
W0955R1
Figure 2. Connecting the Siemens MXL Driver to the MXL System.
ThestandardpracticeusedbyMXL
installers would also r equire a 120-ohm
resistor between terminals 1 and 2.
Do NOT install a resistor across these
terminals.
Siemens Building Technologies, Inc. Page 3 of 4

Siemens MXL Specifications

General

Brand	Siemens
Model	MXL
Category	DC Drives
Language	English