Siemens MXL Series

P/N 315-093402-9
Fire Safety
Installation and Power Limited Wiring Instructions
Model MXL/MXLV Rack Mount Kits (RKs)
for ACM-RK, MKB-RK, MMB-RK, MOM-RK,
MPS-RK, SYS-RK, TSP-RK, VSM-RK, and Cables-RK
* Filler plates can be purchased from any rack manufacturer.
NOTE: Each MXL/MXLV module that is mounted must be ordered separately.
INTRODUCTION
The Model RK series of panels and cables provides standard 19" rack mounting for MXL
(without Voice) and MXLV (with Voice) modules. Table 1 lists the individual rack mount kits along with
the specific modules that mount onto them.
Siemens Building Technologies, Inc.
8 Fernwood Road
Florham Park, New Jersey 07932
Siemens Building Technologies, Ltd.
2 Kenview Boulevard
Brampton, Ontario L6T 5E4 CN
TABLE 1
MXL/MXLV RACK MOUNT KITS
RACK
MOUNT KIT
MOUNTS
MODULE(S)
PLACEMENT
ON RACK
PANEL HEIGHT
X WIDTH
TYPE OF
SYSTEM
ACM-RK
ACM-1, MMM-1, PIM-1,
TBM-1, and TMM-1
Front 17 1/2" X 19" MXLV
MKB-RK
MKB-3, PIM-1 Front 12 1/4" X 19" MXL/MXLV
MMB-RK
MMB-1 or PSR-1 Rear 12 1/4" X 19" MXL/MXLV
MOM-RK
Up to 3 MOM-4s, MOM-2s,
OMM-1s, and/or OMM-2s
Rear 17 1/2" X 19" MXL/MXLV
MPS-RK
Up to 2 MPS-6/-Ws and/or
MPS-12/-Ws
Rear 8 3/4" X 19" MXL/MXLV
SYS-RK
EL-410D Rear 8 3/8" X 19" MXLV
TSP-RK
TSP-40 Front 12 1/4" X 19" MXL/MXLV
VSM-RK
Up to 6 VSM-1s, VLM-1s,
VFM-1s, and/or VSB-1s
Front 7" X 19" MXLV
FILLER
PLATE*
None Front As required x 19" MXL/MXLV
CABLES-RK
(Required)
4 special cables for
connecting modules
MXL/MXLV

Siemens MXL Series Specifications

General

Brand	Siemens
Model	MXL Series
Category	Racks & Stands
Language	English

Summary

Introduction

Rack Hardware

Rack Components Overview

Details the Siemens 6-foot vertical rack and its supplied components for MXL/MXLV systems.

Module Assembly and Installation

MKB-3 Installation

Instructions for installing the MKB-3 module, including power removal and network address setup.

MKB-3 Network Address and Supervision

Configuration of MKB-3 network address settings and supervision using ANN-1 board switches.

TSP-40 Installation

Steps for assembling and mounting the TSP-40 printer module with its rack mount kit.

SYS-RK Installation

Procedure for installing the SYS-RK components and the EL-410D module.

System Assembly and Wiring

Module Mounting Conditions

Guidelines for module placement and cable connectivity within the rack for optimal system function.

CABLES-RK Kit Usage

Details on using the CABLES-RK kit for connecting MXL/MXLV modules and extending cable lengths.

Wiring Duct Installation

Instructions for installing wiring ducts along the rack assembly sides for organized cable management.

Rack Wiring Entry and System Wiring

Non-Power Limited Wiring

Guidelines for routing non-power limited wiring into the rack assembly through designated ducts.

Power Limited Wiring

Procedures for routing power limited wiring into the rack assembly, adhering to specific regulations.

MXL System Wiring

Instructions for connecting modules in MXL systems without voice option.

MXLV System Wiring

Instructions for connecting modules in MXLV systems with voice option.

All Systems Wiring

Final field wiring connections for all MXL/MXLV systems, following installation instructions.