Maintenance and diagnostics
63
Building Technologies 048_DMS_NK8000_ICC_MP4.40_A6V10062437_a_en.doc
Fire Safety & Security Products 06.2011
User types: There are two ways you can log in to the NK8000 Web tool.
– Guest user: (Default) User Name = guest / Password = guest
(Read only privileges, Automatic login)
– Administrative user: Call customer support for username and password.
(Read/Write privileges)
Note: Case sensitive – enter letters in lower case only.
Fig. 47 NK8000 Web Server startup window / Changing user
Remote control commands
The lower frame of the NS8210 utility window displays a list of NK82xx branches in
the NK8000 network (see Fig. 48). The following colour code applies:
Green lines: NK823x units that are properly connected
Yellow lines: connections that are being established
Red lines: communication problem
Light blue lines: branches that are set out of scan
Fig. 48 Pop-up command menu for a single NK82xx branch
Send commands to a specific NK82xx by selecting the Commands icon and
clicking the command in the pop-up menu (Fig. 48). The command list includes:
Build Identifi
cation: Start a CEI 97-5 identification procedure.
Get Version: Get and display the NK82xx version.
To Next Page
Loading...
