Maintenance and diagnostics
9
The NW8204 maintenance and diagnostic tool
76
Building Technologies A6V10062437_a_en
Fire Safety & Security Products 30.06.2013
Configuring the log upload
Uploading log data
Note: If the data upload procedure seems to require a too long time to be
accomplished, you can abort the procedure by clicking the Abort Log Upload button.
Note: The log file can be imported as CSV file in a spreadsheet application in order to
be analyzed by expert users (Technical Support).
Changing the active mass storage device on the fly
If two mass storage devices are available on your system (USB and SD card), you can
change on the fly the active storage device. Proceed as follows:
1. Right-click the inactive mass storage device you want to be active.
2. Select Set as Log storage.
The active mass storage device is represented by a floppy disk icon.
To Next Page
Loading...
