Siemens OOH740 - Accessories; Detector Base with Loop Contact DB721; Detector Base DB722

Structure and function
Accessories
3
45 |
108
Building Technologies
A6V10305793_m
_en_
--
Fire Safety
2016-02-15
3.5 Accessories
3.5.1 Detector base with loop contact DB721
● For the mounting of point detectors
● Thanks to the loop contacts, the detector line is not
interrupted when there is no point detector installed in the
detector base.
● For the recess-mounted cable entry
● For surface-mounted cable entry, up to 8 mm cable
diameter
● Compatible with:
– Multi-sensor fire detector OH720
– Smoke detector OP720
– Heat detector HI720
– Heat detector HI722
– Multi-sensor smoke detector, ASA OOH740
– Neural fire detector OOHC740
– Interbase DBS72x
– Air sampling smoke detection kit FDBZ290
● Order no.: S54319-F11-A1
See also
2 Detector base DB72x and detector base (collective) DB110
[➙ 74]
2 Cable entry [➙ 84]
3.5.2 Detector base DB722
● For the mounting of point detectors
● Thanks to the loop contacts, the detector line is not
interrupted when there is no point detector installed in the
detector base.
● For the recess-mounted cable entry
● For surface-mounted cable entry, up to 8 mm cable
diameter
● Seal integrated in the detector base. Protection
category: IP42.
● Cable connection via spring clips
● Compatible with:
– Multi-sensor fire detector OH720
– Smoke detector OP720
– Heat detector HI720
– Heat detector HI722
– Multi-sensor smoke detector, ASA OOH740
– Neural fire detector OOHC740
● Order no.: S54319-F19-A1
See also
2 Detector base DB72x and detector base (collective) DB110
[➙ 74]
2 Cable entry [➙ 84]