5
76 | 108
2016-02-15
5.3 Sounder base DBS720
1. Install the sounder base DBS720 directly on the ceiling.
2. Insert the cables into the sounder base DBS720. You have the option of using
the following types of line:
– Recess-mounted cable entry
– Surface-mounted cable entry (cable diameter max. 8 mm)
NOTICE
Incorrect laying of cables
Damage to cables and difficulties when installing the point detector
● The cable loops must be placed flat in the base bottom.
The bare length of the cables is approximately
1 Minimum Ø 40 mm 2 Maximum Ø 90 mm
In the case of the sounder base DBS720, the C
interrupted even if a point detector is not used.
1
2
To Next Page
Loading...
