4-6
Manual OP5, OP15
( ) J31069-D0840-U001-A2-7618
4.2 Entering Values
In input fields, values can be entered on the OP and transferred to the PLC .
1. Branch, as described is section 3.3, initially to the screen you require and
then to the corresponding screen entry.
2. Using the arrow keys, select the input field you require within the screen
entry.
3. Then enter your value. Depending on how the field has been configured,
values may be input as
inputs of numerical values (refer to section 4.2.1),
inputs of alphanumeric values (refer to section 4.2.2),
inputs of symbolic values (refer to section 4.2.3).
4. Confirm your input with ENTER.
You can cancel any incorrect input by pressing ESCAPE. The original
value is then automatically reinserted in the field. Insert the correct value
and then enter the corrected value by pressing ENTER.
5. Position the cursor in the next input field using the RIGHT or LEFT ar-
row key, insert the next value etc.
You can also use the arrow keys to move the cursor to the left or right to
the previous input field to insert a different value in it.
6. Close the screen by pressing ESCAPE.
General procedure
General Operation
To Next Page
Loading...
