10-1
Manual OP5, OP15
( ) J31069-D0840-U001-A2-7618
System Settings on Standard Screens
This chapter describes supplementary functions relating to system settings
which can be executed by means of standard screens.
10.1 Selecting a Language
Messages, screens and information text can be displayed in several lan-
guages. Up to three of the languages listed below can be loaded simulta-
neously on the same OP and presented to the operator for selection on line:
German
English
French
Italian
Spanish.
Displays can also be configured in Russian, i.e. in Cyrillic characters, on the
OP15/C.
To choose another language, proceed as follows:
1. Choose the standard screen System → Language.
2. Select the language you require by means of a symbolic input. The selec-
tion list contains only the languages which have been loaded on the OP.
3. The OP performs a cold restart and loads all elements of language-depen-
dent text in the new language.
In this chapter
Online selection of
three languages
Procedure
10
To Next Page
Loading...
