Putting the handset into service
17
Fitting the attachment clip
Press the attachment clip onto the back of the handset until the tabs on
the sides engage in the recesses on the phone.
Connecting the USB data cable
You can connect a standard USB data cable
with a mini-B connector to the underside of
your handset in order to synchronise your
handset with a PC Æ Page 72.
Connect the USB data cable to the USB
jack (1).
Connecting the headset
N You can connect a headset with a 2.5 mm jack plug to the
left side of your handset.
The headset volume corresponds to the setting for the ear-
piece volume Æ Page 19.
1
To Next Page
Loading...
