Conducting calls – the basic functions
43
Step by Step
Consultation
You interrupt your call to consult with a user (including
external users) and then resume the original call.
p You are conducting a call.
Activating and conducting an enquiry/consultation
call
S
or Activate enquiry. The current call is placed "on hold", so
that the first user waits.
o Enter the phone number for the consultation call.
p The number is dialled. The station answers. The consul-
tation starts.
The second user is busy or does not answer
Cancel the enquiry. You are reconnected with the first
party.
Call another user
Or:
You are reconnected with the first party.
The consultation is ended and you return to the
waiting call
Either: The second user hangs up.
Call another user
Or:
You are reconnected with the first party.
You will be connected to the first party again. The
second partner hears the busy tone and hangs up; an
OpenStage handset hangs up automatically.
However, you can also
• toggle between the partners Æ Page 59,
• set up a conference Æ Page 60 or
• transfer the waiting partner to the second partner
Æ Page 58.
Enquiry
Cancel
Enter number
Back
Back
Enter number
Back
To Next Page
Loading...
