Step by Step
Additional functions
72
Data communication with the PC
To enable your handset to communicate with the PC,
the Gigaset QuickSync program must be installed on
your PC (free to download at http://wiki.siemens-enter-
prise.com/wiki/Gigaset_professional_accessory)
After installing "Gigaset QuickSync", connect the hand-
set to your computer using Bluetooth Æ Page 73 or via
a USB data cable Æ Page 17.
Transferring data
Start the "Gigaset QuickSync" program. You can now:
• Synchronise your handset's address book with
Outlook
• Download caller pictures (.bmp) from the computer
to the handset
• Download pictures (.bmp) as screensavers from the
PC to the handset
• Download sounds (ringer melodies) from the PC to
the handset
"Data Transfer" is shown on the display during data
transfer between the handset and PC. During this time,
the keypad is disabled and incoming calls are ignored.
Caution:
• If the USB data cable is plugged in, a Blue-
tooth connection cannot be established.
• If a USB data cable is plugged in during an ex-
isting Bluetooth connection, the Bluetooth
connection is cancelled.
To Next Page
Loading...
