Siemens optiPoint 420 standard - Special Functions in the LAN (PC Network); Leaving a Hunt Group;Group Call

Web Interface
109
 page 100  page 54
Tone Sequence
Setting the ringer sequence for incoming calls.
• Minimum value: 1 (Sequence 1)
• Maximum value: 3 (Sequence 3)
• Default value: 2
 page 103  page 63
User Password
Password input for the web interface user area.
• Current password: enter currently valid password here.
• New password: enter new password here.
• Confirm new password: confirm new password here.
• Default value: 123456
 page 99  page 52
Swap screens Switches the telephone display from line display
to Display Module (DSM) and vice versa.
Quit Function key for ending calls.
Confirm Represents the confirm key "
:
".
1 Function keys are also available on the second level.
Function Key Explanation