Siemens PAD-5-MB - Battery Size Calculations

1
Model PAD-5
Battery Size Calculations
36
Siemens Industry, Inc.
A6V101030358_en--_c
Smart Infrastructure
3.4 Battery Size Calculations
Note 1: Standby/Alarm Battery Load values are adjusted upward to account for the effect of the boost cir-
cuit as the battery discharges.
Note 2: If NAC is configured as AUX, AUX current must be included in the ALARM column if AUX circuit is
configured as "Always ON"
Note 3: AUX current must be included in the ALARM column if AUX circuit is configured as "Always ON"
Note 4: For CDC ZONES, unused circuits should be selected as a shorting device.