Siemens Profiset 3030 - How to use this manual

4
Configuring the keys
Programmable keys are available on two key banks on the “Virtual keypad”. The default key configuration
for bank 0 is shown below. For bank 1, only the “Virtual keypad” key is configured by default. All other keys
are available and can be programmed.
Notes:
The Mute/Internal key will function as Internal when Automatic seizure of an external line is activated. in
all other cases it functions as Mute.
On E 821 ST system telephones the Redialkey functions as a Consultation.
See the User manual (A31003-K1160-B802-*) or the HiPath 1100 Manager for information on how to
program keys. Labels for programmable keys can be printed/changed using the "Printing Labels" service on
the HiPath 1100 Manager.
System telephone settings can be configured individually according to each user’s preferences. For further
information on how to configure a system telephone, see the manual included with the unit.
Feature
Features can be selected as follows:
1. Using the navigation keys in the Main Menu
2. Using the Feature key then browsing the feature option list
3. Using the Feature key and its associated Feature Code
4. Using a programmable key
5. Using the feature code
System telephone functions
Accessing a mailbox key programmed for MWI
Call charge consultation
qji
Call forwarding p
Call forwarding - Deactivation
Parking
d to mslot
Parking - resuming a call
d to mslot
Flash on external analog line
d
Headset - Activation
qhmf
Headset - Deactivation rhmf
Caller List rlfp list and
Programming a feature for a key
qme
feature to be programmed and
Key 1
Key 2
Key 3
Key 4
Key 5
Key 6
Key 7
Key 8
Key 9
Key 10
Key 12
Key 13
Key 14
Key 15
Key 16
Redial
Mute/Inter-
End
Virtual
Key 11
Mailbox
Call forwarding
Call forwarding
Parking
Parking
Select a key
KBA.book Seite 4 Freitag, 15. Mai 2009 12:40 12