7 / 36
Siemens Room Unit for Boiler Control CE1U2283en
Building Technologies Mounting and Installation 2015-09-16
2.2 Installation
· Wall
· Boiler control panel
· The controller may not be exposed to dripping water
· Permissible ambient temperature: 0...50 °C
Step 1 Open the unit at the bottom and remove the
base from the housing front.
Step 2 Connect the bus cable to the screw
teminals.
Step 3 Fit the base to the wall with the help of
screws.
Step 4 Engage the housing front at the top of the
base and close the unit to the bottom.
Mounting conditions
To Next Page
Loading...
