Inside and outside temperature
Temperature display in ℃ or ℉, humidity display in % r.h., CO
2
display in ppm, PM2.5 display in ug/m
3
Operating mode: Comfort, Pre-comfort, Economy, Protection
An arrow indicates that an element can be operated
Display of the relative or absolute setpoint for temperature,
humidity
Indicates that the room operator unit is locked by the system
Fan speed: Fan AUTO, Fan OFF, Fan 1, Fan 2, Fan 3
Navigation: Toggle the display / setpoint setting between
temperature / humidity / CO
2
/ PM2.5. The black bar points to
the displayed information.
Reset device to factory setting
To Next Page
Loading...
Need help?
General
