Siemens RCR10/433 User Manual

CE1N3072en
2014-04-04
Building Technologies
3
072
RDJ10RF RCR10/433
RDJ10RF/SET
Wireless room temperature
controller with 24-hour time
switch and LCD
Programmable, for heating systems
· Operating modes: Automatic, Comfort, Energy Saving, and Frost Protection
· LCD-Display 50 x 45 (W x H)
· RDJ10RF transmitter, battery-powered
· RCR10/433 receiver, mains powered
· Communication of the set is bonded ex factory
Use
The RDJ10RF is used to control the room temperature in heating or cooling systems.
Typical applications include:
· Homes
· Residential buildings
· Schools
· Offices
The controller can be used together with the following equipment:
· Thermal valves or zone valves
· Combi boilers
· Gas or oil burners
· Fans
· Pumps

Siemens RCR10/433 Specifications

General

Operating Voltage	230 V AC
Temperature Setting Range	5°C to 30°C
Control Type	On/Off
Type	Room Thermostat
Power Supply	230 V AC
Protection Class	IP30
Frequency	50 Hz
Mounting Type	Wall
Switching Current	10 (4) A
Accuracy	±1°C

Summary

Use

Functions

Function diagram

Diagram showing controller operation and signal flow.

Operating modes

Overview of Automatic, Comfort, Energy Saving, Frost Protection modes.

Ordering

OVERRIDE

RF LED

Explanation of RF LED states and their meanings.

Relay LED

Explanation of Relay LED states and their meanings.

Notes

Mounting, installation and commissioning

Guidance on physical installation and initial setup.

Technical data

Power supply

Details on operating voltage and battery life.

Operational data

Specifications for thermistor, switching differential, setpoints.

Receiver RCR10/433

Outputs

Details on the receiver's switching capacity and contacts.

Connection diagram