Siemens RDF302/VB - Applications Overview

16 / 62
Siemens RDF302 Basic documentation CE1P3079en
Smart Infrastructure 2022-06-17
3.4 Applications overview
The thermostats support the following applications, which can be configured using
the DIP switches inside the front panel of the unit or a Modbus commissioning tool.
All DIP switches need to be set to OFF (factory setting) to select an application via
commissioning tool.
Remote configuration, via commissioning tool (factory
setting)
DIP switches
See also…
• section 3.4.1 “Applications for fan coil systems”
• section 3.4.2 “Applications for universal systems”
• section 3.4.3 “Applications for heat pump systems”
• section 3.6.5 “Universal applications”
• section 3.6.6 “Compressor applications”.
Remote configuration