Siemens RDF302 - Operation

53 / 58
Siemens RDF302 Basic documentation CE1P3079en
Building Technologies 07 Dec 2011
6. Mechanical design
6.1 General
The thermostats consist of 2 parts:
 Front panel with electronics, operating elements and built-in room temperature
sensor.
 Mounting base with power electronics.
The rear of the mounting base contains the screw terminals.
The base fits on a rectangular conduit box with 60.3 mm fixing centers.
Slide the front panel in the mounting base and snap on.
RDF302
1. Operating mode selector
2. Change fan operation
3. Adjust setpoints and control parameters
For operation, refer to section 4.3.
Opera
tion and settings
2 1
3