Siemens RDH10 How To Use

PKGPT01022A
Technical Details
Power supply: 2 x 1.5V AA batteries
Temperature setting range 5°C - 30°C
Switching voltage 24…250V~
Current rating 5(2)A
Automatic action Type 1.B
Degree of pollution 2
Rated impulse voltage 4000V
Mounting Instructions
Standards According To EN 60730
The controller can be wall mounted.
The RDH10 should be located such that it can acquire the room temperature as accurately
as possible, without being affected by direct solar radiation or other heat or refrigeration
sources.
Check wiring
All electrical connections must comply with current regulations.

Siemens RDH10 Specifications

General

Display	LCD
Protection Class	IP30
Type	Room Thermostat
Temperature Control Range	5°C to 30°C
Operating Voltage	DC 3 V
Mounting	Wall
Accuracy	± 0.5 K
Ambient Temperature	0 to 50 °C
Power Supply	Battery or Mains