Siemens RDF600T

CE1N3076en
2018-12-27
Building Technologies
s
3
076
RDF300, RDF300.02, RDF340 RDF400.01
RDF600 RDF600T
Flush-mounted
room thermostats
RDF300…
RDF340
RDF400…
RDF600...
for 2-pipe, 2-pipe with el. heater and 4-pipe fan coil units
for use with compressors in DX type equipment
· RDF300 / RDF400 / RDF600/RDF600T:
AC 230 V operating voltage, on/off or 3-position control outputs
· RDF340…:AC 24 V, operating voltage, DC 0…10 V control outputs
· Output for 3-speed or 1-speed fan
· 2 multifunctional inputs for keycard contact, external sensor, etc.
· Operating modes: Comfort, Economy and Protection
· Automatic or manual fan speed control
· Automatic or manual heating/cooling changeover
· Adjustable commissioning and control parameters
· Minimum and maximum setpoint limitation
· User and parameter settings can be retained or restored with power loss
Additional features
· Backlit LCD (RDF300.02, RDF400.01, RDF600, RDF600T)
· Infrared remote control receiver (RDF400.01, RDF600T)
· Auto Timer mode with 8 programmable timers (RDF400.01, RDF600T)
Type of mounting / suitable conduit boxes
· RDF600... for round CEE box, with min 60 mm diameter, min 40 mm depth
· RDF3… / RDF400... for recessed square box with 60.3 mm fixing centers

Siemens RDF600T Specifications

General

Type	Room Thermostat
Operating Voltage	230 V AC
Frequency	50/60 Hz
Display	LCD
Protection Class	IP30
Accuracy	±0.5 °C
Installation/Mounting	Wall-mounted
Dimensions (W x H x D)	86 mm x 86 mm x 25 mm

Summary

Product Introduction

Product Models and Key Features

Overview of RDF thermostat models, their key features and capabilities.

Applications and Functions

System Applications

Details applications for 2-pipe, 4-pipe, and DX type fan coil units.

Thermostat Functions

Lists core functions like temperature maintenance, mode selection, and fan control.

Fan Coil System Applications

Application Diagrams

Visual schematics for various fan coil unit configurations and outputs.

Universal System Applications

Application Diagrams

Visual schematics for universal system applications like ceilings and radiators.

Heat Pump System Applications

Application Diagrams

Visual schematics for heat pump system applications with compressors.

Product Summary and Ordering

Type Summary Table

Comparison table of product numbers, voltage, features, and conduit box types.

Ordering Information

Instructions on how to order thermostats, remote controls, and actuators.

Equipment Combinations

Lists compatible sensors, actuators, and their product numbers.

Accessories and Actuators

Actuator Types

Details 3-position and DC 0...10 V actuators with product numbers.

Accessories

Lists mounting kits and conduit boxes for thermostats.

Operation and Display

Mechanical Design

Describes the thermostat's two-part construction (front panel and mounting base).

Operation and Settings

Explains how to operate controls and adjust settings for different models.

Display Symbols

Interprets icons and symbols shown on the thermostat's LCD display.

Installation and Commissioning

Mounting and Wiring

Guidance on physical mounting, wiring, and electrical safety precautions.

Commissioning Process

Steps for setting up the thermostat application via DIP switches and post-reset configuration.

Technical Data and Control

Control Sequence and Parameters

Information on control sequences, compressor application, and setpoint adjustments.

Technical Specifications

Details power supply, outputs, inputs, frequency, and power consumption.

Disposal Guidelines

Instructions for proper disposal of the electronic equipment.

Detailed Specifications

Operational Data

Specifics on switching differential, setpoints, and temperature sensor accuracy.

Environmental and Standards

Climatic conditions, EU conformity, protective class, and pollution class.

General Information

Housing color, weight, and connection terminal specifications.

Wiring and Connections

Connection Terminals

Pin assignments and descriptions for RDF300/400/600 and RDF340 models.

Connection Diagrams

Wiring diagrams illustrating connections for various thermostat models.

Physical Dimensions

Dimensional Drawings

Technical drawings showing the physical dimensions of RDF3/RDF400 and RDF600 series.