To Next PageTo Next Page
Need help?Do you have a question about the Siemens RDH100RF/SET and is the answer not in the manual?
General| Power Supply | Battery |
|---|---|
| Display | LCD |
| Control Mode | On/Off |
| Battery Type | AA |
| Number of Batteries | 2 |
| Frequency | 868 MHz |
| Accuracy | ±0.5 °C |
| Battery Life | Up to 2 years |
| Programming | 7-day programmable |
| Frost Protection | Yes |
| Weight | 150 g |
| Type | Wireless |
| Temperature Range | 5 to 30 °C |
| Communication | RF (Radio Frequency) |
| Mounting | Wall |
| Compatibility | Compatible with Siemens heating systems |
| Wireless Range | 30 meters (indoors) |
Details typical applications and compatible equipment for the wireless room thermostat.
Explains 2-position and PID intelligent learning temperature control algorithms.
Describes different control behaviors (2-position, PID slow/fast) and their applications.
Lists parameters, factory settings, and guides users through the parameter adjustment process.
Details compatible equipment, display, ordering, and mechanical design of the transmitter.
Explains the numbered elements of the transmitter and LED indicators on the receiver.
Details override function, RF LED status, and relay LED status for operational monitoring.
Provides instructions and considerations for mounting the transmitter and receiver units.
Covers battery replacement, reset procedures, and safety warnings for alkaline batteries.
Provides guidelines for product disposal and notes on device maintenance.
Lists related documents and provides detailed specifications for power, sensors, radio, and operation.
Details environmental conditions, standards, directives, and eco design compliance.
Covers receiver unit data, outputs, electrical connections, and physical dimensions for both units.
Illustrates electrical wiring, shows application examples, and provides physical dimensions.
