Technical Details
Power supply: 2 x 1.5V AA batteries
Temperature setting range 5°C - 30°C
Switching voltage 24…250V~
Current rating 5(2)A
Automatic action Type 1.B
Degree of pollution 2
Rated impulse voltage 4000V
Mounting Instructions
Standards According To EN 60730
The controller can be wall mounted.
The RDH10 should be located such that it can acquire the room temperature as accurately
as possible, without being affected by direct solar radiation or other heat or refrigeration
sources.
Check wiring
All electrical connections must comply with current regulations.