Symbols
Absence 24-hour mode
2 heating
periods
“Time” menu Heating active
Comfort
setpoint
3 heating
periods
T
“Temperature”
menu
Cooling active
Economy
setpoint
Current weekday
“Heating
periods” menu
Automatic
operation
Setpoint frost
protection
Workingday group
“Absence”
menu
Continuously
comfort mode
Setpoint remote
operation
Weekend group
Battery
change
Continuously
economy mode
Absence
setpoint
Entire week
Commissioning and quick start
Remote
operation
Frost
protection
1 heating
period
Time schedule
Functions of the roller selector
CLICK
Press:
• You access the menu
level
• You activate the menu
• You save the inputs
• You switch to the next
menu item
• You accept the menu
item
+
Roll:
• You go from one menu to the
next
• You change the setting
variables (temperature in
increments of 0.2 °C, time in
increments of hours and
minutes)
• You select predefined functions
1. Remove controller from its base and open cover
of the battery compartment.
2. Remove the black battery transit tab. The
controller will switch itself on.
3. Close the battery compartment and replace
the controller.
Escape button
Selecting the operating mode
Press the Esc button to return to the menu level previously activated or to leave
the menu level in a number of steps until you reach the initial display
(the settings currently displayed will be accepted).
The operating mode selector enables you
to select 5 different operating modes:
Setting the time of day and the weekday
• Automatic operation with a maximum of 3
heating / cooling periods
• Continuously comfort mode
• Continuously economy mode
• Continuously frost protection mode
• 24-hour mode with current comfort setpoint
Changing temporarily the current
setpoint temperature
CLICK
ð
h
ð
h
ð
ð ð
If no button is pressed for 10 seconds, the setting
displayed will be accepted and the initial display will
appear again.
1. Press: You access the menu level;
the clock flashes.
2. Press: You accept the menu;
the hours flash.
3. Roll: Set the current hour.
4. Press: You save the input;
the minutes flash.
5. Roll: Set the current minute.
6. Press: You save the input;
the weekday flashes.
7. Roll: Select the current weekday.
8. Press the Esc button to return to the menu level:
the T menu flashes
(change not necessarily required; press
the Esc button again to return to the
initial display).
° C
The change is
maintained until
the next
switching point is
reached!
Changing temperatures long-term
1. When pressing the or button for the
first time, the currently valid setpoint temperature
will be displayed. It can be readjusted in
increments of 0.2 °C (max. +/-4 °C).
2. After 3 seconds, the initial display will
automatically appear again.
Changing temporarily the
temperature setpoint (savings tip)
CLICK
ð ð
ð
° C
ð
ð
° C
ð ð
° C
ð ð
° C
ð ð
If no button is pressed for 10 seconds, the setting
displayed will be accepted and the initial display will
appear again.
1. Press: You access the menu level;
the
clock flashes.
2. Roll: Toward the display to the
T menu.
3. Press: You accept the menu;
symbol
flashes.
4. Press: You accept
;
the
setpoint flashes.
5. Roll: Set the
comfort temperature
6. Press: You save the input;
symbol
flashes.
7. Press: You accept
; the setpoint flashes.
8. Roll: Set the
economy temperature.
9. Press: You save the input;
symbol
flashes.
10. Press: You accept
; the setpoint flashes.
11. Roll: Set the
frost protection temperature.
12. Press: You save the input;
symbol
flashes.
13. Press: You accept
; the setpoint flashes.
14. Roll: Set the
temperature setpoint
while remote operation is active.
15. Press the Esc button to return to the menu level:
The heating periods
menu flashes
(Change not necessarily required; press
the Esc button again to return to the
initial display.)
In operating modes and , this
button can be pressed to make a manual
change from comfort to economy mode,
or vice versa. The change will
automatically be cancelled when
reaching the next switching point or
when selecting another operating mode.
Siemens SBT / HVAC Products CE1B2264en 12.03.2002
en
Operating Instructions
REV23
To Next Page
Need help?
General
