Siemens RUGGEDCOM RS910 - Description

Introduction
1.2Description
• Direct support for Modbus TCP, DNP 3, TIN serial protocols
• Raw socket mode allows conversion of any serial protocol
• Point-to-Point (P2P) and multi-point modes
• Converts Modbus RTU to Modbus
• Multiple Modbus masters
• Converts DNP3.0 to DNP over UDP/TCP
Ethernet Ports
• Up to 3 x 10/100Base-TX copper or 10/100Base-FX fiber optic Ethernet ports
• Multi-mode and single-mode optical transceivers
• Integrated fully managed Ethernet switch
• Industry standard fiber optical connectors: LC, SC, ST, MTRJ
Rated for Reliability in Harsh Environments
• Immunity to EMI and heavy electrical surges
• Hazardous Location Certification: Class I Division 2
• -40 to 85 °C (-40 to 185 °F) ambient operating temperature (no fans)
• 20 AWG Galvanized Steel
• DIN or panel mounting options provide secure mechanical reliability
• [Optional] Conformal coated printed circuit boards
Power Supply
• Fully integrated power supply
• Universal high-voltage range:
• 125-250 VDC or 100-240 VAC (Hazardous Environments)
• 88-300 VDC or 85-264 VAC (Non-Hazardous Environments)
• Dual LO DC inputs: 24 or 48 VDC
• Terminal blocks for reliable maintenance free connections
• CSA/UL 62368-1 safety approved to 85 °C (185 °F)
1.2 Description
The RUGGEDCOM RS910 features various ports, controls and indicator LEDs on the
front panel for connecting, configuring and troubleshooting the device.
2
RUGGEDCOM RS910
Installation Manual, 04/2021, C79000-G8976-1029-12