Siemens RWD62 - Software Tool; Functions; Main functions

3/10
Siem ens RW D62 Universal controller CE2N3342en
Building Technologies 2017-12-05
Other combinations with third-party units are possible, provided the input and output
specifications match the RWD62.
A software tool for controller application selection and parameter adjustment is avail-
able. It is a user-friendly Windows® 95 (or above) based software tool which provides
you a printout of the controller settings.
Functions
The RWD62 is a stand-alone universal controller, which performs both primary and
auxiliary control functions. The respective mode is defined by entering the correspond-
ing configuration and setting parameters via the push buttons on the controller or the
software tool.
The RWD62 controller can be programmed as follows:
One sequence: Y1 or Y2 reverse or direct acting
Two sequence: Y1 and Y2 reverse and direct acting or
Y1 and Y2 reverse and reverse acting or
Y1 and Y2 direct and direct acting
Y1
Output
Voltage
Setpoint
Load
3342d01
3342d02
Y1
Output
Voltage
Load
Y2
Setpoint
Reverse acting sequence
(application no.: 10…19)
2 Reverse acting sequences
(application no.: 20…29)
Y1
Setpoint
Load
Y2
3342d03
Output
Voltage
Y1
Setpoint
Load
3342d04
Output
Voltage
Reverse and direct acting sequences
(application no.: 30…39)
Direct acting sequence
(application no.: 40…49)
3342d05
Output
Voltage
Y1
Setpoint
Load
Y2
2 Direct acting sequences
(application no.: 50…59)
Software Tool
Controller type
Main functions