Siemens S46 - During a call

23
6.11.01 S46 US DRAFT A31008-H5450-A5-*
Making a phone call
Swap/Conference
You can call another number during a
call. You can switch back and forth
between both calls or link all callers
together in a conference.
During a call, inform the other party
of your intention, then:
g+ROGg Put the current call on
hold.
You can now dial a new number.
When the connection is established,
you have the following options:
Swap
g6ZDSg Swap back and forth be-
tween the two calls.
Some functions may not be supported by
your service provider.

End current call.
The following query is dis-
played:
"Back to the call on hold?"
g<HVg Return to the held call or
g1Rg The held call is ended.
8
+
R
=
f
=

Hold
X
X
Menü
y
Conference
W
W
PHQXg Open call menu and sel-
ect Conference.
A held call is added (conference call
with up to 5 subscribers).
To end:

All calls are ended simul-
taneously when the End
key is pressed.
Swap/Conference
In TDMA mode, a conference may
have up to three subscribers.
g6ZDSg Press 1 x for conference
Press 2 x for 1st subscriber
Press 3 x for 2nd subscriber
then begin from start.
To end:

All calls are ended simul-
taneously when the End
key is pressed.
Call transfer
W
W
PHQXg Open call menu and sel-
ect Call transfer.
The original call is joined to the sec-
ond one. For you, both calls are now
ended. Note: Not yet supported by
all service providers.
y
q
y 8