Siemens S46 - User Group; During a Call

2.10.02 06-S46 Body.fm i 37 Eagle Am Engl, A31008-H5450-A5-2-4A19
80
Setup
User group
§Menu§

Setup

User group

select a function:
If offered by the service provider, this
service enables groups to be formed.
These have access, for example, to
internal (company) information or
special tariffs which apply to them.
Check with your service provider for
details.
User group
Activate or deactivate the function.
“User group” must be deactivated
for normal phone use.
Select group
You may select or add groups other
than the preferred groups (see be-
low). The service provider supplies
you with code numbers for the
groups.
Outgoing access
In addition to network control for a
user group, it is possible to choose
whether outgoing calls outside the
group are permitted. If the function is
deactivated, only calls within the
group are permitted.
Preferred group
If activated, only calls within this stan-
dard user group can be made (de-
pending on the network configura-
tion).
© Z
During a Call
§Menu§

Setup

During a call

select a function:
Call waiting
If you are registered for call waiting,
you can confirm whether it is set. You
can also activate or deactivate the
function (p. 20).
Hide ID
When you make a call, your
number may be displayed on the re-
cipient's phone (depending on the
service provider).
To suppress this display, you may ac-
tivate the “Hide ID” mode for the
next call or for all subsequent calls.
(You may need to register with your
service provider for this function.)
Prefix code
Prefix codes are needed when dialing
international numbers. For example
all international calls placed from the
US require the international access
prefix "011". To place an international
call in TDMA mode, you may still ac-
cess the international dialing codes
through +List , but you will be
prompted to enter the international
access prefix. These prefix codes
must be preset (see p. 23 Placing In-
ternational Calls).
Z
©
Z
œ
Z