To Next PageTo Next Page
Need help?Do you have a question about the Siemens S7-1500 PROFIBUS and is the answer not in the manual?
General| Power Supply | 24 V DC |
|---|---|
| Rated Value (DC) | 24 V |
| Permissible Range, Lower Limit (DC) | 19.2 V |
| Permissible Range, Upper Limit (DC) | 28.8 V |
| Programming Languages | LAD, FBD, STL, SCL, GRAPH |
| Protection Class | IP20 |
| Communication Interface | PROFIBUS |
| System | S7-1500 |
| Programming Language | LAD, FBD, STL, SCL, GRAPH |
| Operating Temperature | 0 °C to 60 °C |
| Engineering with | TIA Portal |
Details the module's use as a PROFIBUS DP master or slave in S7-1500 systems.
Describes the physical PROFIBUS interface and connection options.
Provides critical safety warnings for device operation, installation, and use in hazardous environments.
Details specific precautions and requirements for installation and repair work in hazardous locations.
Outlines the steps for physically installing, wiring, and bringing the module into operation.
Details how to configure the module using SIMATIC STEP 7, including loading configuration data.
Lists and explains preprogrammed blocks for communication services and distributed I/O.
Describes available diagnostics methods including LEDs, STEP 7 features, and DP diagnostics overview.
Lists electrical, environmental, and physical specifications for the CM (6GK7542-5DX00-0XE0).
Lists electrical, environmental, and physical specifications for the CM (6GK7542-5DX10-0XE0).
