Need help?Do you have a question about the Siemens SIMOCODE pro and is the answer not in the manual?
General| Protection Class | IP20 |
|---|---|
| Mounting Type | DIN rail mounting |
| Rated Operational Voltage | 24 V DC |
| Rated Current | Up to 820 A |
| Protection Functions | Overload, short-circuit, phase failure, asymmetry, ground fault, motor stall |
| Operating Temperature Range | -25°C to +60°C |
| Communication Protocols | PROFIBUS DP, PROFINET, Modbus RTU |
| Analog Outputs | Up to 2 |
| Temperature Monitoring | PTC/KTY, RTD (PT100/PT1000) |
| Digital Outputs | Relay outputs, Solid-state outputs |
| Analog Inputs | 0/4-20mA, PT100/PT1000 |
Discusses Siemens' commitment to industrial security and customer responsibilities.
Lists the blocks and other components included in the SIMOCODE pro PCS 7 Library V9.0.
Details the procedures for configuring SIMOCODE pro devices in HW Config and CFC.
Explains the function and purpose of the driver generator for signal processing in PCS 7.
Introduces templates for adopting control functions and lists associated blocks.
Explains how to instantiate and interconnect templates within the SIMOCODE pro Library in CFC.
Explains the structure, navigation, and views (Batch, Trend, Alarm, Preview) of SIMOCODE pro faceplates.
Details the MMDiag block's purpose, messages, and driver generator integration.
Provides an overview of the MMOprtn block, its purpose, views, and parameters.
Describes the MMMeas block for gathering measured value parameters and diagnostic data.
Covers the MMRevDhl block for controlling Dahlander High Feature reversing starters.
Details input and output parameters for the MMOprtn block.
Details input and output parameters for the MMRevDhl block.
To Next Page