Need help?Do you have a question about the Siemens SIMOCODE pro PCS 7 and is the answer not in the manual?
General| Product designation | SIMOCODE pro PCS 7 |
|---|---|
| Integration | PCS 7 |
| Communication interface | PROFIBUS DP |
| Protection class | IP20 |
| Supply voltage | 24 V DC |
| Digital inputs | Via connected modules |
| Digital outputs | Via connected modules |
| Analog inputs | Via connected modules |
| Analog outputs | Via connected modules |
| Operating temperature | -20°C to +60°C |
| Ambient temperature | -20 to +60 °C |
| Storage temperature | -40°C to +70°C |
| Relative humidity | 5 to 95% non-condensing |
| Mounting type | DIN rail mounting |
Explains configuration of PROFIsafe modules for safety.
Provides detailed diagnostic information for SIMOCODE pro devices.
Explains the purpose and functions of the MMDiag block for SIMOCODE pro diagnosis.
Details the functions, parameters, and views of the MMOprtn block.
Explains the purpose and functions of the MMOprtn block for SIMOCODE pro.
Details the functions and parameters for measuring values.
Explains the purpose of MMMeas block for gathering measured values.
Comprehensive guide to the MMRevDhl block for reversing starters.
Lists and describes all input parameters for the MMOprtn block.
Lists and describes all input parameters for the MMMeas block.
Lists and describes all input parameters for the MMStat block.
Lists and describes all input parameters for the MMLog block.
Lists and describes all input parameters for the MMRevDhl block.
To Next Page