Siemens SIMOCODE pro User Manual

Description of the blocks
4.4 Block for MMMeas measured value function
SIMOCODE pro PCS 7 Library V9.0
154 Programming and Operating Manual, 06/2017, A5E40899442002A/RS-AA/001
4.4
Block for MMMeas measured value function
4.4.1
Description of MMMeas
Purpose of the block
The MMMeas block gathers measured value parameters from data record 94. It receives
diagnostic data from the MMDiag block.
For SIMOCODE pro C / S / V PROFIBUS and PROFINET devices, the MMMeas block
provides information on the following topics:
● Current values
● Voltage values
● Active power
● Apparent power
● Thermal motor model
● Temperature
● Ground fault
Views
The MMMeas block supports the following views:
● Batch
● Trend
● Alarm
● Preview
● Standard
Reference
MMMeas block parameter (Page 252)
Functions for all blocks (Page 72)
Overview of the templates, control functions and blocks (Page 38)

Siemens SIMOCODE pro Specifications

General

Protection Class	IP20
Mounting Type	DIN rail mounting
Rated Operational Voltage	24 V DC
Rated Current	Up to 820 A
Protection Functions	Overload, short-circuit, phase failure, asymmetry, ground fault, motor stall
Operating Temperature Range	-25°C to +60°C
Communication Protocols	PROFIBUS DP, PROFINET, Modbus RTU
Analog Outputs	Up to 2
Temperature Monitoring	PTC/KTY, RTD (PT100/PT1000)
Digital Outputs	Relay outputs, Solid-state outputs
Analog Inputs	0/4-20mA, PT100/PT1000