Description of the blocks
4.2 Diagnostics block MMDiag
SIMOCODE pro PCS 7 Library V9.0
94 Programming and Operating Manual, 06/2017, A5E40899442002A/RS-AA/001
Diagnostics block MMDiag
4.2.1
Description of MMDiag
Purpose of the block
The MMDiag block is responsible for diagnosis of the SIMOCODE pro device.
● It evaluates the acyclic events:
– Start
– DP/IO station failure
– Module fault
– Process alarm
– Diagnosis alarm
● It generates the associated Quality Codes.
● It reads all diagnostic information for the MOD_SWT block.
● It transmits the status information to the signal processing block via the OMODE
parameter output.
The MMDiag block does not support views.
● Overview of the templates, control functions and blocks (Page 38)
● Functions for all blocks (Page 72)
● MMDiag block parameter (Page 234)
● Structure of UDTs for MMDiag (Page 237)
To Next Page
Loading...
Need help?
General
